| No. | Condition Text |
|---|
| 1. | The operations come within the provisions of Schedule 2, Part 1, Class B of the Town and Country Planning (General Permitted Development) (England) Order 2015, thereby not requiring planning permission. |
| 2. | The operations come within the provisions of Schedule 2, Part 1, Class C of the Town and Country Planning (General Permitted Development) (England) Order 2015, thereby not requiring planning permission. |
| 3. | Class B Informative
The development is permitted by Class B subject to the following conditions-
(a) the materials used in any exterior work must be of a similar appearance to those used
in the construction of the exterior of the existing dwellinghouse;
(b) the enlargement must be constructed so that-
(i) other than in the case of a hip-to-gable enlargement or an enlargement which joins the original roof to the roof of a rear or side extension-
(aa) the eaves of the original roof are maintained or reinstated; and
(bb) the edge of the enlargement closest to the eaves of the original roof is, so far as
practicable, not less than 0.2 metres from the eaves, measered along the roof slope from
the outside edge of the eaves; and
(ii) other than in the case of an enlargement which joins the original roof to the roof of a rear or side extension, no part of the enlargement extends beyond the outside face of any external wall of the original dwellinghouse; and
(c) any window inserted on a wall or roof slope forming a side elevation of the dwellinghouse must be-
(i) obscure-glazed, and
(ii) non-opening unless the parts of the window which can be opened are more than 1.7 metres above the floor of the room in which the window is installed. |
| 4. | Class C Informative
Development is permitted by Class C subject to the condition that any window located on a roof slope forming a side elevation of the dwellinghouse shall be-
(a) obscure-glazed; and
(b) non-opening unless the parts of the window which can be opened are more than 1.7 metres above the floor of the room in which the window is installed. |
| 5. | Rear Dormer Window Finish Informative
The applicant should note that the face and cheeks of the rear dormer window shall be tile hung to match the appearance of the main roof of the dwelling. |
| 6. | Roof Light on top of the rear dormer
The applicant should note that the roof light on top of the rear dormer window should not project above the ridge of the original dwelling house to comply with permitted development guidelines. |
| 7. | Party Wall Informative
This planning permission does not remove the need to obtain any separate consent of the owner of the adjoining property prior to commencing building works on, under, above or immediately adjacent to their property (e.g. foundations or guttering). The Party Wall Etc. Act 1996 contains requirements to serve notice on adjoining owners of property under certain circumstances, and a procedure exists for resolving disputes. This is a matter of civil law between the two parties, and the Local Planning Authority are not involved in such matters.
A free guide called "The Party Wall Etc Act 1996: Explanatory Booklet" is available on the website of the Department for Communities and Local Government.
https://www.gov.uk/government/publications/the-party-wall-etc-act-1996-revised-explanatory-booklet |
| 8. | Building Regs
This certificate provides confirmation that the development is lawful. You should also check whether the development requires separate Building Regulation consent. Information is available on the Building Control webpages and the team is available between 9am and 10am Monday to Friday via 01708 432700. |
