| No. | Condition Text |
|---|
| 1. | Notwithstanding the provisions of the Town and Country Planning (General Permitted Development) (England) Order 2015, no window or other opening (other than those shown on the submitted and approved plan,) shall be formed in the flank wall(s) of the building(s) hereby permitted, unless specific permission under the provisions of the Town and Country Planning Act 1990 has first been sought and obtained in writing from the Local Planning Authority.
Reason:-
In order to ensure a satisfactory development that will not result in any loss of privacy or damage to the environment of neighbouring properties which exist or may be proposed in the future, and in order that the development accords with Development Control Policies Development Plan Document Policy DC61. |
| 2. | The roof area of the extension hereby permitted shall not be used as a balcony, roof garden or similar amenity area without the grant of further specific permission from the Local Planning Authority.
Reason:-
In the interests of the amenity of the occupiers of neighbouring dwelling, and in order that the development accords with the Development Control Policies Development Plan Document Policy DC61. |
| 3. | The applicant should note that the dimensions outlined on the application form should be adhered to.
In the instance the proposal has a shallow pitched roof, the eaves height is measured from ground level at the base of the outside wall to the point where that wall would meet the upper surface of the roof slope - the overhang should be ignored for the purposes of measurement.
However where the proposal has a flat roof, the eaves height is measured from the ground level at the base of the outside wall to the point where that wall would meet the upper surface of the flat roof - the overhang and the parapet wall should be ignored for the purposes of measurement.
Any changes which require a further application should be submitted prior to commencement on site. |
